VC182 User Manual
8
Installation
Installation of the VC182 is simply a matter of plugging in the appropriate
cables.
To install the VC182, refer to the installation diagram as you perform the
following steps:
1. Use an HDB-15 cable to connect the VGA source device to the
VGA
Input
port on the VC182.
2. Use an HDMI cable to connect the display device to the
HDMI Output
port on the VC182.
3. Connect your audio source device to the
Audio In
port (Stereo) at the rear
panel.
4. Connect your audio source device to the
Audio In
port (Coaxial) on the
front panel.
5. (Optional) To manage the VC182 using the utility tool, connect your
computer via the
Firmware Upgrade
port.
6. Plug the provided power adapter into an appropriate power source; plug
the power adapter cable into the
Power
jack on the VC182.
7. Check that the
Status
LEDs: the Power LED lights red and the Signal
LED lights green to indicate that the VC182 is receiving power and ready
to operate.
2
1
2
2
2
3
2
4
2
5
2
6
Front panel
Rear panel