Chapter 3. Local Operation
20
Power LED Indication
The power pushbutton is equipped with an LED that indicates the power status
of the VP3520
.
Refer to the table below for the status and supported tasks for
each LED indication.
LED Indication
(Power Pushbutton)
VP3520 Status
Tasks
Dim
The VP3520 is
powered off.
To power on the VP3520, press the
power pushbutton
(VP3520 front
panel) /
power button
(IR remote
control) once.
Flashes orange
The VP3520 is
loading system
information.
Wait for the unit to finish loading
information.
Orange
The VP3520 is in
standby mode.
The standby mode is a power-saving
mode that shuts parts of the system
down to allow the user to quickly
resume operation when needed.
To awake the VP3520, press the
power pushbutton
(VP3520 front
panel) /
power button
(IR remote
control) once.
Note:
To power off the VP3520
when it is in standby mode, awake
the unit first, and then follow the
steps in the next entry to power off
the unit.
Flashes green
The VP3520 is
busy running
remote control
processes.
Wait for the unit to finish running
remote control processes.