ATEN VanCryst VE1901AEUT, User Manual, Page: 24 / 45

VE1901AEUT / VE1901AUST User Manual
14
Power Supply Information
(Optional) If you wish to use power adapter for power, follow the steps below.
1. Cut the connector end of the power adapter.
2. Strip 5 mm (0.5cm) off the insulation cover of the power adapter cable to
expose two wires: a +5V wire and a GND (grounding) wire.
3. Insert the e5V wire and GND (grounding) wire tightly into the 5-
pin terminal block provided, which can be connected to the unit for power
supply. Refer to
Terminal Block Connection on page 13 for more details.
Note: One method to determine an exposed wire’s polarity (i.e., +5V or
GND) is by using a voltmeter.
+5V
GND
GND
5mm
1
2
3
(+)
(-)
+5V