ATEN UH3233, User Manual, Page: 9 / 12

- 9 -
Installation
To set up the UH3233, use the diagram on the next page (the
numbers in the diagram correspond with the numbered
instructions below), and do the following:
1. Use the USB-C to USB-C cable (included with the package)
to connect the laptop's USB-C port to the UH3233.
Note: 1. To ensure a good connection, check that the Power
LED on the top of the UH3233 is on.
2. When the LED on the top of the UH3233 lights
orange, please connect an AC adapter to the USB
device connected to the USB 3.1 Gen 1 Type-C port,
as the orange light indicates that the connected
laptop cannot provide enough power for the USB-C
device.
2. Connect a USB device (keyboard/mouse/peripheral/adapter)
to the USB 3.1 Gen 1 Type-A port on the UH3233.
3. Connect an HDMI cable from the monitor to the HDMI Port 1
on the UH3233.
4. Connect a second HDMI cable from the monitor to the HDMI
Port 2 on the UH3233.
5. Power on the laptop and monitors.
1. Make sure that the power to any device that you
connect to the installation has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.