
- 20 -
2. Follow the Installation Wizard's on-screen instructions to
complete the installation.
Note:
1. This procedure only occurs the first time you connect
the peripheral. If your peripheral was previously
connected and configured for the RS-232 (COM) port,
after you perform the Adapter Installation and click
Finish, the driver will detect it and install it automatically.
However, some peripheral devices, such as older
PDAs, require that you re-install the software for the
peripheral device before it will work properly.
2. Under Windows 2000, if you connect a modem, you
must specify it as a
Standard Modem
.
uc232a.fm Page 20 Wednesday, December 11, 2019 1:30 PM