Chapter 1. Introduction
15
Note:
Holes for ATEN Lok-U-Plug cable holders are located around the
sockets. See
, page 21, for further information.
No.
Item
Description
1
Power Cord
Plug the power cord into your AC source.
2
Circuit Breakers (Bank 1
and Bank 2)
As a safety measure, if there is an overcurrent
situation regarding the device’s power, the circuit
breakers will trip. Press the button to recover
normal operation.
3
Power Sockets*
24 in total (24 x NEMA 5-15R Twist Lock)
Bank 1–1: 8 x NEMA 5-15R Twist Lock
Bank 1–2: 8 x NEMA 5-15R Twist Lock
Bank 2: 8 x NEMA 5-15R Twist Lock
4
Sensor Ports
External sensors plug into these two RJ-11 ports.
5
LAN Port and LEDs
The cable that connects the eco PDU to the LAN
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link
: Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN
: Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
6
Readout Section, LEDs
and Reset Switch
Details of this section are provided on page 16.
7
Output Power Indicator
This LED lights steady to indicate output power for
the related bank.
