4. OSD Operation
27
F5 SKP
Skip (SKP) Mode enables you to easily skip backward or forward - switching
the console focus from the currently active computer port to the previous or
next available one.
The selection of computers to be available for Skip Mode switching is
made with the
Scan/Skip Mode
setting under the
F3 SET
function (see
page 21).
When you are in Skip Mode, press [
←
] to switch to the previous
computer in the List; press [
→ ]
to switch to the next computer in the
List; press [
↑ ]
to switch to the last computer on the previous station in
the List; press [
↓ ]
to switch to the first computer on the next station in the
List.
Note:
When you Skip, you only Skip to the previous or next available
computer that is in the
Scan/Skip Mode
selection (see page 22).
If a Port has been selected for
Scan/Skip Mode
, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
To exit Skip Mode, press
[Spacebar]
or
[Esc]
.
cs1708-1716.book Page 27 Thursday, July 19, 2007 3:06 PM
