Two Stage Installation
Adding a second stage enables one CPU Switch (the first stage CS-104 or CS-106) to control computers directly or
indirectly via cascaded CPU Switches (the second stage CS-102, CS-104 or CS-106). The number of PCs under control is
determined by the configuration.
Fig. B
1.
Set DIP switch 4 of the first stage CPU Switch to ON and all others off.
2.
Computers may be connected to the first stage and the second stage CPU Switches. 5-pin DIN connectors are for AT
style keyboard sockets; 6-pin mini-DIN connectors are for PS/2style keyboard sockets.
3.
Use either keyboard port per computer.
4.
To connect the keyboard ports of two CPU Switches, use the 5-pin DIN ports only.
Note:
1. Add a power adapter if the CPU Switch works abnormally.
2. Neither the PC1 or PC2 port of a CS-102 or CS-122 can be connected to a CS-104 or CS-106.
3. For PS/2 users: You must connect a PS/2 mouse, because a serial mouse can not replace a PS/2 mouse. For
cascaded operation, connect PS/2 mouse ports of successive stages using a 6-pin mini-DIN male-to-male
cable.
Summary of Contents for Master View CS-102
Page 11: ......