ATEN ES0152, User Manual

Page: 75 / 300

Chapter 5. CONFIGURE Commands of CLI
63
Example:
ES0152(config)# no dot1x authentication timer re-
authenticate
ES0152(config)# no dot1x guest-vlan supplicant
ES0152(config)# no dot1x max-reauth-req
ES0152(config)# no dot1x re-authentication
ES0152(config)# no dot1x system-auth-control
ES0152(config)# no dot1x timeout tx-period
5-1.31.8 enable
Modify enable password parameters.
Syntax:
No enable password [ level <1-15> ]
No enable secret [0|5 { level <1-15> }]
Parameters:
Guest-VLAN Globally enables/disables state of guest-vlan.
Supplicant The switch remembers if an EAPOL frame has been received
on the port for the life-time of the port. Once the switch
considers whether to enter the Guest VLAN, it will first check if
this option is enabled or disabled. If disabled (unchecked;
default), the switch will only enter the Guest VLAN if an EAPOL
frame has not been received on the port for the life-time of the
port. If enabled (checked), the switch will consider entering the
Guest VLAN even if an EAPOL frame has been received on
the port for the life-time of the port.
Tx-period The time between EAPOL retransmissions.
Parameter Description
Password Assign the privileged level clear password.
Secret Assign the privileged level secret.
0 Specifies an UNENCRYPTED password will follow.
5 Specifies an ENCRYPTED password will follow.
Level Set exec level password.
<1-15> Level number.
Parameter Description