Installation
Installation is simply a matter of plugging in the cables. For
standalone installation, refer to the diagram on the next page.
For KVM installation, refer to the diagram on p. 8.
1. Make sure that all the equipment to be connected up is
powered Off.
2. Plug the cables from the console devices (keyboard,
monitor, mouse), into their ports on the Console side of the
CV-131.
Note:
1.
If you are using the CV-131 with a KVM switch plug
the KVM cables from the CPU ports of the switch
into the Console side of the CV-131.
2.
SUN workstations use a three button mouse. To
fully emulate its functions, you need to use a three
button PS/2 mouse.
3. Plug the B Connector end of a USB cable into the USB port
on the CPU side of the CV-131. Plug the A Connector end of
the cable into the computer’s USB port.
4. Plug the female end of a VGA cable into the VGA connector
on the CPU side of the CV-131. Plug the male end of the
cable into the computer’s video port.
Note: Use of substandard cables may damage the connected
devices or degrade overall performance. For optimum
signal integrity and to simplify the layout, we strongly
recommend that you use the high quality integrated
cable included with this package.
- 6 -
2004-05-07