ATEN CV-130A, User Manual, Page: 11 / 20

3
Chapter 2
Installation
Hardware Installation
Installation is simply a matter of plugging in the cables. Refer to the installation
diagram as you perform the steps below:
Note: Make sure all the equipment to be connected is powered off and properly
grounded.
1. Plus the KVM switch end of the converter cable into any available CPU port
on the KVM switch.

For SPHD-15 type switches, plug in the CV-130A’s single SPHD-15
connector.

For PS/2 type switches, plug the CV-130B’s keyboard, mouse, and
monitor connectors into their respective ports in the CPU section of the
switch.
Note: SUN workstations use a three button mouse. To fully emulate its
functions, you need to use a three button PS/2 mouse.
2. Plug the other end of the cable into the Sun station’s keyboard and video
ports.
1. Important safety information regarding the placement of this
device is provided on page 7. Please review it before
proceeding.
2. Make sure that power to all the devices you will be installing has
been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.