CL-1200 User Manual
16
Console Selection
Console selection on the CL-1200 is accomplished with hotkey combinations,
as described in the following table:
Note:
1. Press the keys in sequence - one key at a time. First [Ctrl], then [Alt],
then [Shift], etc.
2. Console selections are not saved. If the switch is powered off, it
reverts to the default setting of both consoles enabled when it is
powered on again.
3. If the KVM switch connected to the CL-1200 uses the [Ctrl] [Alt]
[Shift] combination to invoke its hotkey mode, you won't be able to
access any of its hotkey operations because the CL-1200 will capture
the combination for console selection first.
Port ID Numbering & Port Selection
Port ID numbering and Port Selection follow the method used by the KVM
switch connected to the CL-1200. Consult your KVM switch's User Manual for
details.
Combination
Action
[Ctrl] [Alt] [Shift] [L] [Enter]
Enable Local (LCD) console;
Disable Remote (external) console.
[Ctrl] [Alt] [Shift] [R] [Enter]
Enable Remote (external) console’
Disable Local (LCD) console.
[Ctrl] [Alt] [Shift] [L] [R] [Enter]
Enable both consoles (default).
cl1200_v2.book Page 16 Friday, March 10, 2006 1:43 PM
