- 9 -
Installation
Setting up the CE-700 KVM Extender system is simply a matter
of plugging in the cables. Refer to the installation diagram on the
following page and do the following:
1. Make sure that all the equipment to be connected up is
powered Off.
2. Plug the cables from the local console devices (mouse,
keyboard, monitor), into their ports on the Console side of the
Local Unit (CE-700L).
3. Plug the appropriate connectors on the USB KVM cable
supplied with this unit into the CPU side of the CE-700L. Each
connector is marked with an appropriate icon to indicate
which it is.
Note:
The female monitor connector is the one that plugs into
the CE-700L.
4. Plug the connectors on the other end of the cable into the
appropriate ports on the computer (or Console section of the
KVM switch - if you are using one). Each connector is marked
with an appropriate icon to indicate which it is.
5. Plug either end of the Cat 5 cable into the CE-700L's Remote
I/O port.
6. Plug one of the power adapters (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE-700L's Power Jack
7. Plug the other end of the Cat 5 cable into the I/O port of the
Remote Unit (CE-700R).
8. Plug the cables from the remote console devices (mouse,
keyboard, monitor), into their ports on the Console side of the
CE-700R.
9. Plug the second power adapter (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE-700R's Power Jack.
CE700.fm Page 9 Friday, November 10, 2006 1:52 PM