5
Chapter 2
Hardware Setup
Connecting the CAMLIVE Unit
Follow the steps below to connect the CAMLIVE to an HDMI source and the
host.
1. Power on your host (e.g. laptop).
2. Connect the USB-C Host Connector to the host. If your laptop only has a
USB-A interface, connect the (included) USB-C to USB-A adapter*
between the host and the USB-C Host connector.
3. Connect your HDMI source device to the CAMLIVE’s HDMI port.**
*When using the adapter, if you are only detecting MJPG video, please disconnect the
USB-C head from the adapter, flip the USB-C head around and reconnect it to the
adapter. Please refer to
on page 13 for more details.
**UC3020 cannot display or capture HDCP protected content
To enable CAMLIVE, please download and install a suitable video recording or
live streaming software for your requirement. Below lists some examples of
supported video recording / live streaming software.
All trademarks are property of their respective owners.
OBS: https://obsproject.com
Xsplit: https://www.xsplit.com
https://www.youtube.com
https://www.facebook.com
A general reference of how to go about using CAMLIVE is described in the next
chapter.
Please review the safety information regarding the placement
of this device in