ATEN ATEN VanCryst VM1600A, User Manual

Page: 68 / 204

Modular Matrix Solution User Manual
54
Serial Port Setting
To configure the VM1600A’s serial port settings, select Serial Port Setting
from the Menu page.
Serial Port Address Setting
To set the VM1600A’s serial port address, do the following:
1. Select Serial Port Address Setting from the Serial Port Setting submenu
by pressing 1 :
2. Press pushbuttons 1–16 to make your selection.
Note: The default serial port address is 1. This address is used for RS422/
485 commands to control multiple VM1600A’s.
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
1: IP Seng
2: Serial Port Seng
3: Operaon Mode
4: Security Mode
1: Serial Port Address Seng : 1
2: Baud Rate Seng: 19200
3: Serial Port Mode: RS232
Serial Port Address : 1