ATEN Altusen RCMDP101U, User Manual, Page: 25 / 180

Chapter 1. Introduction
13
RCMDP101U Front View
No. Component Description
1 PC/KVM
DisplayPort
port Use the DisplayPort cable provided to connect the PC /
workstation to the unit through this port.
Note: Audio is not supported by CN9950's DisplayPort and
can only be transmitted through its 3.5 mm audio ports.
2 KVM audio
Ports Connect the audio of the PC / server to these ports for audio
signal transmissions.
3 CPU COM
(RS-232 DTE)
port Connect a serial data communication equipment device (e.g. a
modem or PC) to this port. See page 24 for details.
4 local console
COM (RS-232
DCE) port Connect a serial data terminal equipment device (e.g. a PC or
touch panel) to this port. See page 24 for details.
5 KVM USB
Type-B port Use the USB cable (USB Type-A to USB Type-B) provided to
connect the PC / server to this port for keyboard and mouse
signal transmissions.
6 laptop USB
console (LUC)
port For laptop local access (See Local Access , page 121),
connect the laptop to this port using the USB Type-A to USB
Mini-B cable provided.
Make sure the mode of USB IO Settings (see
USB IO
Settings , page 73) is set to LUC.
If the mode of USB IO Settings is set to Virtual Media, this port
will not work.
7 reset button Press the reset button for more than 3 seconds to revert the
unit back to factory default settings.
8 power LED Lights green when the unit is powered on.
2 3 4 5 7 8 9 6