ATEN ALTUSEN KM0832 User Manual Download Page 85 | Manualshive

Page: 85 / 138

ATEN ALTUSEN KM0832 User Manual Download Page 85

Chapter 3. Administrator Utility

69

Viewing and Ending User Sessions

The KM0832 lists all users who are currently logged in to the KM0832
Administrator Utility and shows details about their sessions. If a user account
is misused or if another user needs to login to the KM0832 Administrator
Utility, Super Administrators can view and end the sessions of other Super
Administrators, Administrators and Users. However, users with active sessions
in the KM0832 OSD are not listed on this page and their sessions cannot be
ended.

To view current user sessions:

1. If you are not logged in to the KM0832 Administrator Utility, then open

the KM0832 Login page and login. The KM0832 Administrator Utility
main screen will appear.

2. Click the

Session

icon. The

Active Sessions

page appears. It displays

information about the users who have active sessions in the KM0832
Administrator Utility.

«
...
83
84
85
86
87
...
»

Summary of Contents for ALTUSEN KM0832











































































































































Reviews:

No comments