KM0216 / KM0432 User Manual
54
Hotkey Beeper Control
The Beeper (see
, page 43) can be Hotkey toggled On and
Off. To toggle the Beeper, key in the following Hotkey combination:
1. Invoke HKM (see page 49).
2. Press
[B]
After you press [B], the Beeper toggles On or Off. The Command Line displays
Beeper On
or
Beeper Off
for one second; then the message disappears and you
automatically exit HKM.
Hotkey Summary Table
[Num Lock] + [
*
]
or
[Num Lock] + [-]
[Port ID] [Enter]
Switches the KVM focus to the computer
that corresponds to that Port ID.
[T] [n] [Enter]
Sets the Auto Scan interval to
n
seconds
–
where
n
is a number from 1–255.
[A]
Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, press
[P] or left-click the mouse to pause Auto
Scanning.
When Auto Scanning is paused, press any
key or left-click the mouse to resume Auto
Scanning.
[
←
]
Invokes Skip Mode and skips from the
current port to the first previous accessible
port.
[
→
]
Invokes Skip Mode and skips from the
current port to the next accessible port.
[
↑
]
Invokes Skip Mode and skips from the
current port to the last accessible port of
the previous station.
[
↓
]
Invokes Skip Mode and skips from the
current port to the first accessible port of
the next station.
[B]
Toggles the beeper on or off.
km0216-0432.book Page 54 Wednesday, April 14, 2010 3:17 PM
