ATEN ALTUSEN KH1508I User Manual Download Page 156

Page: 156 / 176

KH1508i / KH1516i User Manual

144

Technical Support

International

For online technical support – including troubleshooting, documentation,
and software updates:

http://eservice.aten.com

For telephone support, see

Telephone Support

, page iii.

North America

When you contact us, please have the following information ready beforehand:

Product model number, serial number, and date of purchase.

Your computer configuration, including operating system, revision level,
expansion cards, and software.

Any error messages displayed at the time the error occurred.

The sequence of operations that led up to the error.

Any other information you feel may be of help.

Email Support

[email protected]

Online
Technical
Support

Troubleshooting
Documentation
Software Updates

http://www.aten-usa.com/support

Telephone Support

1-888-999-ATEN ext 4988

Summary of Contents for ALTUSEN KH1508I

















































































































































































Search results

Summary of Contents for ALTUSEN KH1508I

Reviews:

ATEN ALTUSEN KH1508I, User Manual, Page: 156 / 176

Search results

Summary of Contents for ALTUSEN KH1508I

Reviews: