Chapter 6. Administration and Configuration
79
Miscellaneous
The functions performed by the remaining elements at the bottom of the screen
are described in the table, below:
Parameter
Explanation
Reset on Exit
Place a check here to have the KH1508i / KH1516i reset itself and
implement all the new settings when you log out. Following the
reset, wait approximately 30 to 60 seconds before logging back in.
Note:
For some changes the
Reset on exit
check box is
automatically selected and the KVM switch will reset when you log
out. Clearing the check mark before logging out will cause the new
settings to be discarded.
Reset Values
Clicking this button undoes all changes that have been made to the
Configuration and Administration pages (except for the Port Names
that were assigned to the Ports - see
, page 96) and
returns the parameters to the original factory default settings (see
Clear Name List
This function is similar to Reset Values. The difference is that it also
clears the Port Name settings at the same time that it undoes all
changes and returns the setup to the original factory default
settings.
kh15816i.book Page 79 Wednesday, December 26, 2007 11:12 AM
