4
IDENTIFICATION OF PARTS
5
6
7
8
1
LED LIGHT
JUMP
ST
ART
12V 1200A
USB OUTPUT
CAR JUMP
ST
ARTER
2
3
4
TECHNICAL SPECIFICATIONS
①
②
USB Output Button (ON/OFF): Press USB OUPUT button to activate. (Note: please disconnect the charger
first, then press the USB OUPUT button when your electronic devices are fully charged. And press USB output
button, and the Charge LEDs will indicate the charge level of the internal battery.)
③
LED Light Button (ON/OFF): Integrating 4 light modes: 100% > 50% >SOS > Strobe > Off (Note: the LED light
will automatically turn off after 2 hours.)
④
Jump Start Button (ON/OFF): Jump start activated: LED indicator flashes white.Reverse connection: LED
indicator flashes red.
⑤
USB-A Ports x2
⑥
USB-C Port
⑦
Integrated LED Light
⑧
Jump Start Port
Note:
As long as jump start is activated, the timing function will be on and the device will be automatically
powered off after 90 seconds.
The jump starter will automatically turn off, when only one charge LED is on (which indicates that the
voltage of the internal battery is below 13.3V).
Battery Level Indicator: Indicates the charge level of the internal battery.
