5
TROUBLESHOOTING
If any problems occur during battery operation, please refer to the following instructions or contact us for professional help.
Overcharge
Disconnect your battery from charging, and allow it to recover.
Over-current /short circuit protection
Over discharge
-
Disconnect your battery, if it recovers abnormally, please use LiFePO4
Built in BMS will automatically cut off its output
and in this circumstance
-
,
, you
battery charger to activate it.
are recommended to use LiFePO4 battery charger to activate your battery
.
Temperature beyond normal ranges
Built-in BMS will automatically disconnect the battery from the load, and
allow it to cool down or warm up to room temperatures. If your battery
recovers abnormally, please use LiFePO4 battery charger to activate it.
PROBLEM
SUGGESTED SOLUTION
Note:
It is highly likely that your battery is damaged if it cannot be activated by the charger.
BATTERY MAINTENANCE & STORAGE
Regularly inspections are essential. The battery, particularly its terminals, should be clean, dry and free
of corrosion.
Disconnect your battery from charging load or source before cleaning the top of your battery, terminals,
and connections with a damp cloth or non-metallic brush. Please ensure that your battery is
COMPLETELY dry before reactivating.
Store your battery in an open, well ventilated and dry area in temperatures between -20
℃
~45
℃.
Avoid sharp impacts or extreme pressure.
Give your battery a full charge prior to use when it is taken out of storage.
Charge your battery at least once every 3 months to prevent over-discharge.
DO NOT forget to disconnect your battery from equipment to eliminate any potential parasitic loads that
may discharge it.
PARTS LIST
M6*14 x2
Parts (Screws)
AP50LFP-12V
AP100LFP-12V
AP150LFP-12V
AP200LFP-12V
M8*14 x2
M8*14 x2
M8*14 x2
M5*8 x2
AP20LFP-12V
BCI Group Size
151R
22NF
31
4D
6D
MODEL NO.