1. Unscrew the covers from
the SIM card slot and
Ethernet LAN port on the
bottom panel.
2. This ODU device is
designed to connect to a
4G LTE network. Kindly
ensure that you have an
active LTE SIM card from
your service provider.
Note:
Insert Standard SIM card
(2FF) size to SIM slot as directed
with image.
3. Connect an Ethernet cable
to the LAN port on the
bottom panel of this device,
threading it through the
hole on the Ethernet cover.
Note:
Must use a 4 pair Ethernet
cable.
4. Tighten both covers on the
bottom panel of the device.
Setting up your J-Series ODU
Install the SIM Card & Connect the Ethernet Cable
Using PoE to Connect J-Series ODU with PC
Power ON your J-Series ODU
•
To turn on your device, you need to connect the
Ethernet cable coming from the ODU to the PoE
injector‘s P+D/OUT Port.
•
Now connect power cord to PoE injector’s AC/IN Port.
•
The Power LED on the ODU should now be on; this
indicates that the ODU is successfully powered ON.
•
To connect your ODU to your PC, first turn the
ODU on using the PoE injector.
•
Connect your computer/PC with the PoE’s Data/IN
Port using the Ethernet cable. Make sure your
computer’s Ethernet is configured to obtain an IP
address automatically.
Please only use the provided Power adaptor & PoE injector with
the ODU. The use of other incompatible adapters & PoE may cause
damage to your device and void the warranty.
Note:
Must use a 4 pair Ethernet cable between ODU & PoE Injector.
2FF SIM
LAN Port
Ethernet Cable