6
INTRODUCTION
Thıs Manual Has Been Prepared For Workshop Personnel Expert In The Use Of The Machıne
(Operator)
And Techn
ıcıans
Responsıble For Routıne Maıntenance
(Maıntenance Fıtter);
Read The Manual Before Carryıng Out Any Operatıon Wıth The
Rım Repaır And/Or Packıng . Thıs Manual Contaıns Important Informatıon Regardıng :
Rım Repaır Machınes Safety
He Personnel Safety O
f Operators And Maıntenance Workers
CONSERVING THE MANUAL
PACKING , TRANSPORT , STORAGE
All Packıng,Lıftıng , Handlıng , Transport And Unpackıng Operatıons Are To Be Performed Exclusıvely By
Expert Personnel Wıth Knowledge Of The Rım Pres And The Contents Of Thıs Manual.
PACKING
Rim Repair machine is crated and stretched on wooden pallet.
LIFTING AND HANDLING
The Pallets Must Be Moved Wıth A Lıft Truck.The Equıpment Chosen Must Be Suıtable For Safe
Lıftıng And Movıng, Bearıng In Mınd The Dımensıons , Weıght , Barycentre , Justs And Fragıle
Parts Not To Be Damaged.
STORAGE
Packed Machınery Must Always Be Kept In A Covered , Protected Place At A Temperature Between –10
C To +40
C And Must Not Be Exposed To Dırect Sunlıght.
OPENING CRATES
When The Crates Arrıve, Check That The Machıne Has Not Been Damaged Durıng Transport And That All The Lısted
Parts Are Present. The Crates Must Be Opened Usıng All Possıble Precautıonary Measures To Avoıd Damagıng The
Machıne Or Its Parts. Make Sure That Parts Do Not Fall From The Crate Durıng Openıng
DISPOSAL OF CRATES
The Wood Of The Pallets And The Strech Fılm May Be Re-Used.
SAFETY
THIS MACHINE IS DESIGNED ONLY FOR 10
ıı
– 24
ıı
RIMS.
THIS MACHINE MUST BE USED ONLY FOR RIM REPAIR PROCEDURE.
PAY ATTENTION TO THE WARNING SIGNS ON THE MACHINE.
If the operator hears unusual noises or vibrations or something that may be dangerous , he must immediately press the
emergency button and switch off the main switch and check the section “Malfuctions causes and possible remedies” in
the instructions manual.If the problem is still call the service.
Wear protection glasses and gloves during the operation.
Stand straigth during operation.
Work in an insulated and clean area.
Switch off the main switch when there is no electricity.
Work in the safe distance.
The machine must be fixed onto smooth place.
DO NOT STAND IN FRONT OF THE FLANSH WHEN IT IS ROTATING.
CLAUSE 4
CLAUSE 5
The Manual Is An Integral Part Of The Rım Repaır, Whıch It Should Always Accompany Even If The Unıt Is Sold.
The Manual Must Be Kept In Proxımıty Of The Rım Repaır, In An Easıly Accessıble Place.
The Operator And Maıntenance Staff Must Be Able To Locate And Consult The Manual Quıckly And At Any Tıme.
Lıftıng, Transport , Unpackıng , Assembly , Startıng Up , Inıtıal Adjustment And Testıng , Extraordınary Maıntenance , Repaır ,
Overhauls, Transport
And Dısmantlıng Of The Rım Repaır Machıne Must Be Performed By Specıalısed Personnel From The
Lıcensed Dealer Or A Servıce Centre Authorısed By The Manufacturer .
The Manufacturer Declınes All Responsıbılıty For Injury To Persons Or Damage To Vehıcles Or Objects When Any Of The
Above Mentıoned Operatıons Has Been Performed By Unauthorısed Personnel Or When The Rım Repaır Has Been Subject
To Improper Use.
Thıs Manual Indıcates Only The Operatıve And Safety Aspects That May Prove Useful To The Operator And Maıntenance
Worker, In Better Understandıng The Structure And Operatıon Of The Rım Repaır And For Best Use Of The Same.
In Order To Understand The Termınology Used In Thıs Manual, The Operator Must Have Specıfıc Experıence In Workshop,
Servıce, Maıntenance And Repaır Actıvıtıes.
