DSP Components
485
© 2017, ATEÏS, member of PAX ProAV Group
Element Description
Input Mute: Mute/unmute the channel input.
Input Level: Set the input level of the channel.
Output Mute: Mute/unmute the channel output.
Output Level: Set the master output level of the channel.
Routing: Turns on/off the input on the particular output channel.
5.17
Net Input
5.17.1 Global Net Input
This component transfers the audio signals over Ateis Net. The signal goes into a channel of Net Output
component and retrieves from the output with the same channel or any other Net Input component(the
signal path is one to many relationship). There are up to 48 channels available to carry signals, and the
number of channels will be distributed based on the number of channels you set on [
The diagram below shows a example using
IDA8 devices to show the configuration of the
Net Input and Net Output components.
In Device editing window, create an IDA8C and
an IDA8SAB. Connect the SO to SI pin to create
a Ateis Net system.
In the DSP design window of IDA8C, it utilizes
the Net Input/Output channel 1 to transport
audio signal from Input A channel in IDA8C(1,1)
to Output C channel in IDA8C(2,1).
