4. TRANSPORT OF THE MACHINE
*
The transport should be done by qualified personnel only.
4.4.1.The machine should be transported by lifting with proper equipment (not touching the ground during the
transport).
4.4.2.Don’t lift the machine before ensuring that lifting devices or other equipment is placed properly under the
machine.
4.4.3.For the weight and dimensions of the machine, 2.2. Technical Features.
5. INSTALLATION OF YOUR MACHINE
The machine should be located at least 100 cm in front of the back wall. The machine is equipped with a
burr collection bag connector and power supply socket on the back side.
5.1. Preparation
5.1.1.The outer dimensions of the machine are stipulated in the dimensions page. The ground, where the
machine will be placed, should be even, solid enough to bear the weight of the machine.
5.1.2.At the double head automatic saw machine Crater all parts are delivered by the manufacturer ready for
use.
5.1.3.
Do not make electrical connections without removing the bolt and stop connections used for the
detection of running systems before the machine is started and without wiping the protective oil layer in
working parts.
If main connection cable is
damaged during operation, do
not touch it and disconnect the
main plug from main socket.
Use protective earmuffs.
When machine is working, do
not make your hand close to saw
blade.
Use protective gloves when
changing the saw.
Keep working environment
clean, dry and tidy.
Read operating instructions
carefully before using or
maintaining the machine.
!
!
!
!
!
!
12
