Atec A390SM Installation Manual Download Page 1

Page: 1 / 12

Tilting & Swiveling

Flat Panel Wall Mount

Installation Guide

• Supports most 14” - 47” Flat Panel TVs

• Maximum weight capacity: 77 lbs.

• Supports VESA Sizes up to 400X400

• Easy installation

• Low proﬁle

• Built-in level for easy positioning

• Corrective leveling adjustments

after installation

• Forward / backward tilt range:

+5 to -15 degrees

• Left to right swivel range: 180 degrees

• Extension range: 2.7” to 18.5

”

Model: A390SM

For technical assistance or troubleshooting

please call 1-800-936-1168

This product Wall Mount frame is intended for use only with an apparatus which has a maximum weight of 77 lbs. See apparatus

instructions. Using with an apparatus heavier than the maximum weight indicated may result in instability and cause possible

injury.

READ THIS FIRST Read this entire manual! Do not attempt to install this product if you do not understand the instructions.

Contact a qualified mount installer if you have any doubts about a safe and secure mount installation, or if you are not sure what

specific wall materials you are attaching this mount to. Check all the parts carefully to make sure there are no missing or

damaged parts. Improper installation may result in damage to your TV, property, and personal injury.

Summary of Contents for A390SM













Search results

Summary of Contents for A390SM

Reviews:

Related manuals for A390SM

Brands by name

Popular brands

Atec A390SM, Installation Manual

Search results

Summary of Contents for A390SM

Reviews:

Related manuals for A390SM

Brands by name

Popular brands