2
9.
Do not overreach. Keep proper footing and balance at all times .Do not reach over or across running
machines.
10.
Maintain tools with care . Keep tools sharp and clean for better and safer performance. Follow
instructions for lubricating and changing accessories . Inspect tool cords periodically and, if damaged,
have them repaired by an authorized technician. The handles must be kept clean, dry , and free from oil
and grease at all times.
11.
Disconnect power. Unplug tool when not in use.
12.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the
tool or machine work surface before plugging it in.
13.
Avoid unintentional starting. Be sure the switch is in the OFF position when not in use and before
plugging in. Do not carry any tool with your finger on the trigger. Whether it is plugged in or not.
14.
Stay alert. Watch what you are doing , use common sense . Do not operate any tool when you are tired.
15.
Check for damaged parts. Before using any tool, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function . Check for
alignment and binding of moving parts; any broken parts or mounting fixtures ; and any other
condition that may affect proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the tool if any switch does not turn ON and OFF
properly.
16.
Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerator enclosures.
17.
Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any
other parts will void the warranty . Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
18.
Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not
operate the tool.
19.
Maintenance. For your safety , service and maintenance should be performed regularly by a qualified
technician.
20.
Use proper size and type extension cord. If an extension cord is required, it must be of the proper size
and type to supply the correct current to the tool without heating up. Otherwise, the extension cord
could melt and catch fire, or cause electrical damage to the tool.
21.
Pacemaker safety warning. People with pacemakers should consult with their physician(s) before using
this product; operation of equipment in close proximity to a heart pacemaker could cause interference
or failure of the pacemaker.
Note: Performance of this tool may vary depending on variations in local line voltage. Extension cord
usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur . It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Arc Welding Safety Warnings and Precautions
Warning: This product, when used for welding and similar applications, produces chemicals may cause
cancer and birth defects ( or other reproductive harm).
1.
Avoid electrical shock. Do not permit electrically live parts, cables , or electrodes to contact skin,
clothing, or gloves. Protective clothing should be free of holes, dry.
