Ple
ase d
o n
ot
rem
ove
ca
rd
fro
m
th
e
Sp
ace
de
c A
cro
ba
t
Art
icu
late
d W
all A
rm
For your comfort and safety please take a few
moments to adjust the position of your display
To adjust the Spacedec Acrobat Articulated
Wall Arm, please refer to the instructions in
this User Operating Card
Use the Ergonomic Guidelines overleaf
as a guide for correct positioning
Depending on the weight of the display, it may be
necessary to make adjustments to the Ball Joint
Mechanism. If the display doesn’t hold its position
or is too resistant, adjust the four tension screws
located around the Ball Joint (see diagram) using
the supplied 2.5mm Allen Key.
Check the display, and then adjust again if
necessary.
NOTE: Be sure to adjust screws evenly.
Tighten
Loosen
Tension
Screws (x4)
Ball Joint
2.5mm
Allen Key
It is possible to control the amount of resistance
in the Pivot Head to suit your display.
To increase the resistance of the Pivot Head to
suit heavier displays, use the 5mm Allen Key
supplied in the Desk Clamp Box to tighten the
interscrew in a clockwise direction.
To decrease the resistance of the Pivot Head to
suit lighter displays, loosen the interscrew in an
anti-clockwise direction.
NOTE: It is recommended the Pivot
Head be left at the factory setting for
best performance.
Pivot Head
Interscrew
5mm Allen Key
Loosen
Tighten
Lighter
display
Heavier
display
Raise Gas Strut
to suit lighter
display
Arm
5mm
Allen key
Gas Strut
Lighter
Heavier
Lower Gas Strut to
suit heavier display
B.3.1
Depending on the weight of the display,
it may be necessary to adjust the arm. This can
be done by using the supplied 5mm Allen Key.
B.3.2.
If the arm tends to automatically rise
or fall when the display is attached, it will be
necessary to make small adjustments to the gas
strut. (see diagram)
B.3.3.
If the arm tends to rise, the gas strut
position should be raised. If the arm tends to
fall, the gas strut position should be lowered.
B.1. Adjusting Ball Joint friction
B.2. Adjusting Pivot Head tension
B.3. Adjusting Gas Strut Resistance
USER
OPERATING CARD
SPACEDEC ACROBAT
ARTICuLATeD WALL ARM
