Atdec AWMS-2-4640-C Installation Manual Download Page 11

AWM-A46 Page 4 of 4

  

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without 
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer 
reserves the right to alter specifications without notice. ©20180521C

Note:

 The cable cover shown 

does not come with all posts

7.4

 To reposition the cable cover, pull it 

straight up and out of the post and insert 
it into any of the available channels

Cable cover

Cable 
Cover

Desk

Clamp

7.1

 Push the cable down into the cable clip

Note:

 Cable clips do not 

come with all posts

7.6

 Feed remaining cable into cover

7.5 

Loop cable and insert into cable cover

7.2 

Push cable clip into post channel

7. 

Post cable management

7.3

 Recommended post cable cover 

position for double or triple arm set-ups 

Note

Ensure enough cable 
slack is given to allow for 
movement of the monitor

Push

6. 

Monitor arm cable management

6.1

 Plug cables into the monitor and route 

the cables down the arm using the cable 
hooks and clips

Alternative cable 
cover positions 

AWM-A46 Page 4 of 4

  

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without 
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer 
reserves the right to alter specifications without notice. ©20180521C

Note:

 The cable cover shown 

does not come with all posts

7.4

 To reposition the cable cover, pull it 

straight up and out of the post and insert 
it into any of the available channels

Cable cover

Cable 
Cover

Desk

Clamp

7.1

 Push the cable down into the cable clip

Note:

 Cable clips do not 

come with all posts

7.6

 Feed remaining cable into cover

7.5 

Loop cable and insert into cable cover

7.2 

Push cable clip into post channel

7. 

Post cable management

7.3

 Recommended post cable cover 

position for double or triple arm set-ups 

Note

Ensure enough cable 
slack is given to allow for 
movement of the monitor

Push

6. 

Monitor arm cable management

6.1

 Plug cables into the monitor and route 

the cables down the arm using the cable 
hooks and clips

Alternative cable 
cover positions 

AWMS-2-4640-C | Page 11 of 11

Summary of Contents for AWMS-2-4640-C












Reviews: