AWM-HS Page 2 of 2
1.
Attach slider to monitor
1.1
Fix the slider onto
monitor using the
provided screws.
Slider orientation should match your desired
monitor orientation,
landscape
or
portrait
.
Note:
Ensure the lever is unlocked when fitting.
3.
Adjust the monitor position
3.1
To adjust the monitor’s horizontal position,
tilt it back slightly and slide left or right.
3.2
To level the screen simply rotate it
to the desired position.
3.3 (Optional)
Monitor rotation
tension may be adjusted by
tightening or loosening a small
screw with the provided allen key.
PUSH
SLIDE
+/-
10°
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20190208
2.
Mount slider on arm
2.1
Mount slider onto the monitor arm
2.3
Push the lever down to secure
it to the arm assembly
2.2
Ensure that the slider is seated fully into
the receptacle at the end of the monitor arm.
There should be
no
gap.
Gap
No gap
