AWM-A71 Page 2 of 4
3.
Mounting arm assembly
3.1
Slide arm assembly into channel
3.2
Move to desired height
Note:
Ensure
clamp lever is
vertical and
unlocked
Note:
Squeeze and
hold clamp jaws
before inserting
Post
3.3
Lock at preferred height
by pushing lever down
Wall Channel
‘Click’
2.
Fit arm onto channel clamp
1.
Optional 180� rotation limiter
2.1
Push arm onto clamp
1.1
Remove plastic sleeve
2.2
Ensure arm is fully pushed onto clamp
1.2
Remove rotation ring
2.3
Lightly tighten set screw, ensure that
rotation of the arm is smooth
Tip:
Check that
rotation of the
arm is smooth
1.3
Place rotation ring in
desired orientation/ position
Note:
Place the rotation ring
depending on what post channel
the arm will be attached to. The tag
should always face towards the user.
1. Press
2. Lift
180°
360°
OR
Default
Position
Flipped
Position
Tag
Note that the arm is set to rotate 360� by default. To reduce the arm’s rotation to 180�, follow the steps below.
Fit top cap on post
