AD-TVC-75 Page 1 of 4
Installation Guide
AD-TVC-75
AV Cart 75
COMPONENT CHECKLIST
A
Base (x1)
E
Shelf (x1)
F
Shelf Lip
(x1)
G
LHS VESA
Bracket (x1)
H
RHS VESA
Bracket (x1)
K
Shelf Connection
(x2)
L
Grommet
(x2)
M
Hook and
Loop (x3)
I
Shelf Clamp (x1)
J
Castor (x4)
A1
M8x25
Screw (x4)
B1
M6x25
Screw (x4)
C1
M5x25
Screw (x4)
E1
ø16xø6.2
Washer (x4)
F1
ø15x10mm
Spacer (x4)
A2
M8x20
Screw (x2)
B2
M8x20
Cap Screw (x2)
C2
M8x72
Cap Screw (x4)
D2
M5 Allen
Key (x1)
E2
M6 Allen
Key (x1)
C
Mounting Plate (x1)
B
Column (x1)
D
Mounting Brace (x1)
D1
M4x12
Screw (x4)
F2
ø19x13mm
Spacer (x4)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Failure to mount this product correctly may cause serious injury/death during or following installation.
! This product should only be installed by professional installers of good mechanical aptitude, who fully understand these
instructions and the consequences of incorrect installation.
! Do not over tighten screws.
! Two person installation is recommended.
! Product not suitable for use outdoors.
! After installation is complete check to verify that AV Cart is secure and safe for use.
! Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA
locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.
Please contact Atdec if you would like further information.
!
WARNING!
Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control
or toys placed on the cart may encourage a child to climb on the cart and as a result the cart may tip over on to the child.
REQUIRED TOOLS
• Phillips Head Screwdriver
CAPACITY
DISPLAY
0 - 75kg (0 - 165lb)
50” - 80”
SHELF
0 - 11kg (0 - 24lb)
