45˚
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to the continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 5/11/15 ©
Step 5. How to adjust from sitting to standing
Installation Complete
Step 6. Adjust lift assistance
Push
Note:
For heavier weights turn the
adjustment screw towards ‘
+
’
For lighter weights turn the
adjustment screw towards ‘
-
’
Adjust the amount
of lift assistance. The
workstation should
not fall when the lift
paddle is depressed.
While gripping onto the sides of the work surface, depress the lift paddle to adjust the height of the work station.
6.2
6.1
This workstation is compatible with accessories such as monitor mounts. For advice on positioning accessories on
this workstation please refer to the Technical Specifications for this product, found on atdec.com.
Position the workstation at mid height
While gripping onto the sides of the work
surface, depress the lift paddle and adjust
the angle of the lift mechanism to 45° from
the table.
I
