ATD Tools ATD-30332 Owner'S Manual Download Page 2

Intended Use:

This product is intended for indoor residential, office, industrial, or other commercial
applications. Use only with electrical wiring that is in good working order and that
meets applicable codes and ordinances. If you have any questions whether your
wiring is adequate, consult a qualified electrician.

While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed below.
As part of those instructions, we have used the word "WARNING" to indicate the
level of hazard: WARNING indicates a hazard which, if not avoided, could result in
injury or death.

IMPORTANT INSTRUCTIONS

As with all electrical appliances, basic safety precautions should always be followed
to reduce the risk of electric shock, fire, or injury to persons, including the following
precautions:

Ь

Read all the instructions before using this fan.

Ь

Use this fan only as described in this manual. Any other use not recommended by

the manufacturer may cause electrical shock, fire or injury to persons.

Ь

Do not operate the fan with a damaged power cord or after the fan malfunctions

or has been dropped in any manner.

Ь

Use of extreme caution is necessary when any fan is used by or near children,

disabled persons or pets and whenever the fan is left operating unattended.

Ь

Do not place the fan on an unlevel, uneven or any surface which might allow fan

to tip or fall.

Ь

For proper operation, fan should be placed on a smooth, non- combustible, level

surface.

Ь

Always unplug fan when not in use, when moving from place to place, when

assembling or disassembling parts, and before cleaning.

Ь

The use of attachments, not recommended or sold by the manufacturer, may

cause hazards.

Ь

Do not use outdoors.

Ь

Do not use fan in window. Rain may cause electrical hazard (for non-window

models).

Ь

Do not operate the fan with blade guards or any safety device removed.

Ь

Avoid the use of extension cords due to risk of fire. If an extension cord must be
used, the cord must be minimum 14 AWG and rated not less then 1875 watts.

Ь

Do not run power cord under carpeting. Do not cover cord with throw rugs,

runners or the like. Arrange cord away from traffic area where it will not be tripped
over.

Ь

Do not insert or allow any object to enter any openings on the fan. Doing so may

cause electric shock and/or fire hazard. Avoid contact with moving parts.

Ь

Children should be supervised to ensure they do not play with the appliance.

Summary of Contents for ATD-30332











Reviews: