run power cord under carpeting.
cover cord with throw rugs,
runners or the like. Arrange cord away from traffic area where it will not be tripped
over. Avoid the use of extension cords due to risk of fire. If an extension cord must be
used, the cord must be minimum 14 AWG and rated not less then 1875 watts. Do not
use an extension cord unless the plug can be completely inserted into its receptacle.
Unplug the fan when not in use. Do not operate fan with its ventilation obstructed.
CAUTION:
This fan is equipped with an automatic reset limit control. If fan overheats
for any reason this limit control will open and will stop the fan
CAUTION:
Read and follow all instructions before operating fan. Do not use fan if any
part is damaged or missing.
WARNING:
1. To reduce the risk of fire or electric shock, do not use this fan with any solid state
speed control device.
2. This appliance has a ground plug which is intended to fit in an outlet only one way.
If this does not fit outlet contact a qualified electrician. Do not attempt to bypass
this procedure.
3. This product is for indoor use only.
4. Unplug from electrical supply source before cleaning.
5. If the power cord is damaged, contact your local service cent r
e or a qualified
electrician to install an appropriate replacement cord to prevent any injury or
damage.
6. Children should be supervised to ensure that they do not play with the appliance
Rules for Safe Operation:
1. Never insert fingers, pencils, or any other object through the guard when fan is
running.
2. Disconnect the fan when moving from one location to another.
3. Disconnect the fan when removing grilles for cleaning.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. Do not use fan in window. Rain may create electrical hazard.
6. The fan is for commercial use only.
7. Do not leave the fan running unattended.
Operating Instructions:
1. Adjust the desired speed by rotating the switch:
0 - Stop, 1 -Low, 2 -Medium, 3 -High.
2. Adjust the tilt angle by rotating the guard. Loosen the knobs before rotating and
tighten after rotation is set.
Do not
Do not