IPPBX IP02 User Manual
~ 7 ~
ATCOM TECHNOLOGY CO., LIMITED
Set the host name for IPPBX.
IP Address / Subnet Mask
Set the IP address / subnet mask for LAN network interface.
Gateway
Set the Gateway for LAN network interface.
Primary DNS / Secondary DNS
Set the DNS server for LAN network interface.
IP Address 2 / Subnet Mask 2
Set the failover IP address for LAN network interface.
2.4 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to configure devices that are
connected to a network (known as hosts) so they can communicate on that network using the Internet Protocol
(IP). It involves clients and a server operating in a client-server model.
Enable DHCP server
Check to enable DHCP server.
Default Gateway
Gateway information that will be used in DHCP client.
Subnet Mask
Subnet Mask that will be used in DHCP client.
Primary DNS / Secondary DNS
DNS information that will be used in DHCP client.
Start IP / End IP
Summary of Contents for IPPBX IP02
Page 1: ...IPPBX IP02 User Manual For Firmware Version V3 0 2013 12 11...
Page 45: ...IPPBX IP02 User Manual 43 ATCOM TECHNOLOGY CO LIMITED 2 Set inbound route for FXO trunk...
Page 65: ...IPPBX IP02 User Manual 63 ATCOM TECHNOLOGY CO LIMITED...
Page 69: ...IPPBX IP02 User Manual 67 ATCOM TECHNOLOGY CO LIMITED Finish...