IPPBX IP01 User Manual
~ 25 ~
ATCOM TECHNOLOGY CO., LIMITED
4.3
Make outbound calls
Go to
PBX Settings
->
Outbound Routes
, click
to add an outbound route.
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X
means Any Digits from 0-9
Z
means Any Digits from 1-9
N
means Any Digits from 2-9
[1234-9]
means Any Digits in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
.
means one or more digits
!
will match none remaining digits, and causes the matching process to complete as soon as it can be
determined that no other matches are possible.
For example: Once set Dial Pattern: 2XX Strip: 0, that means any calls to 200-299 will be forwarded out. Please
do not simply set it to X., otherwise all telephone numbers with 2 or 2+ digits will be matched, this outbound route
probably affect your interior calls, unless your local extensions is just a single figure.
Strip
: The number of digits that will be stripped from the front of the dialing string before the call is placed via
Selected Trunks. See example in Chapter 6.
Prepend these digits:
Allows the user to specify digits that are prepended before the call is placed via the trunk.
Password:
Authentication for Selected Extensions before dialing out.
Outbound Extension Selection
: Select extensions which can dial out with this outbound route. In my case, only
6000 and 6001 can dial out with this trunk.
Outbound Trunk Selection:
Select trunks which calls are forwarded out through.
