AXE1DL User Manual with DAHDI
www.atcom.cn
6
LED: The LED of the four ports will be red clearly, when the driver of the card is loaded correctly
and the “/etc/dahdi/system.conf” file is configured correctly, ;
the LED will be green clearly, when the PRI line is connected correctly, and it synchronizes to the
other equipment successfully, .
C2: It is used for selecting E1, T1, J1 mode. In default, it will be set it up according to users
requirement before shipping out. Users can set up E1, T1/J1 like the following:
For E1 Mode
For T1 and J1 Mode
C4: It is used when there are more than one PRI card in the one server;
For example: if users have two cards in the server, then turn it to 0 in the one card, and turn it to 1
in the other card; If users have four cards in the server simultaneously, then turn it to 0,1,2,3
respectively.
