PaloSanto Solutions
Atcom AT530P Server Setup Guide
10
Figure 4.12 Endpoint Configurator
4. Cl
ick the “Set” button
. This will reboot the phone. After the phone has finished
rebooting, it will be automatically configured with the selected User Extension.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Atcom AT530P, pick up the previously configured IP (SIP) Phone and
call the AT530P
’s extension number (301 in this example). When the call is
established, speak into the phone and verify that the other IP (SIP) Phone can hear
your voice. Check this by calling from both ends.
PaloSanto Solutions
Atcom AT530P Server Setup Guide
10
Figure 4.12 Endpoint Configurator
4. Cl
ick the “Set” button
. This will reboot the phone. After the phone has finished
rebooting, it will be automatically configured with the selected User Extension.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Atcom AT530P, pick up the previously configured IP (SIP) Phone and
call the AT530P
’s extension number (301 in this example). When the call is
established, speak into the phone and verify that the other IP (SIP) Phone can hear
your voice. Check this by calling from both ends.
PaloSanto Solutions
Atcom AT530P Server Setup Guide
10
Figure 4.12 Endpoint Configurator
4. Cl
ick the “Set” button
. This will reboot the phone. After the phone has finished
rebooting, it will be automatically configured with the selected User Extension.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Atcom AT530P, pick up the previously configured IP (SIP) Phone and
call the AT530P
’s extension number (301 in this example). When the call is
established, speak into the phone and verify that the other IP (SIP) Phone can hear
your voice. Check this by calling from both ends.
