ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
8
setting:
1. Enter setting mode: use the dial pad to enter the password of the
phone (when debug is not set as 0[disable], default password is 1234;
when debug is set as 0[disable], please use super password 19750407),
and then press , till is displayed. Then enter the
password again and press to let the phone enter setting
mode.
2. Enable eTalk: Once the phone enter setting mode, will be
seen, then press to turn over the menu, until is
displayed. Please press to enter submenu and then
continually press to turn over the menu until
is displayed on the screen. Please press to
enter change mode, then you will see a cursor flashing at the beginning
of the second line. It indicates that you can change the setting of this
item. Then press to enable eTalk and then press to
confirm. will be seen.
3. Set eTalk account (0117ETNS)
:
press to turn over the menu,
once is displayed on the screen, please press
to enter change mode, then you will see a cursor flashing at the
beginning of the second line. It indicates that you can change the
setting of this item. Then press 0117 keys once respectively, 3 key
thrice, 8 key twice, 6 key thrice and 7 key quintic. Then press
Password
:
network
settings
protocol
settings
calling card
0[normal]
Local IP
#
Speaker
Vol
+
2
account
Vol
+
Speaker
Speaker
calling card
2[etalk]
Vol
+
Local IP