APBX IP08 User Manual
18
ATCOM TECHNOLOGY CO., LIMITED
The call flow should be like below:
1.
C calls A, phone A is ring, but A is not at his/her seat.
2.
B can dial Direct Call Pickup code + A’s extension number to pick up the ring call, and talk to C.
Intercom
Connect directly to a specified phone.
The call flow should be like below:
1.
A dial Intercom code + B’s extension nubmer.
2.
If Phone B supports page/intercom, it will answer the call automatically.
2)
Call Park
It allows a person to park a call on IPPBX and continue the conversation from any other telephone set.
The call flow should be like below:
1.
A and B are on the conversation.
2.
A dial call park code (e.g. *6), PBX will tell A a park extension (e.g. 701) and then hang up the call. B is parked
on PBX.
3.
C dial park extension: 701, PBX will bridge C and B.
3)
Call Forward
Users can configure their follow me settings via their phones.
Reset to Defaults
Reset follow me settings by dialing *70 (default code, can be changed). After dialing in, PBX will prompt a “beep”,
then the setting is completed and the call will be hung up.
Enable/Cancel Unconditional Call Forward
Enable/Disable call forward Always function.
Enable/Cancel Call Forward On Busy
Enable/Disable call forward When Busy function.
Enable/Cancel Call Forward On No-Answer
Enable/Disable call forward When No Answer function.
Call Forward to Number
Set the destination for call forward to number by dialing *74 (default code, can be changed), if the number is not set
yet, dial *74+number to set it.
Call Forward to Voice Mail
Set the destination for call forward to voicemail.
NOTE: Default Follow Me settings are as below:
Always: Disabled
When no answer: Enabled
When busy: Enabled
Forward to: Voice Mail
