APBX IP01 User Manual
24
ATCOM TECHNOLOGY CO., LIMITED
Path
Set the destination for incoming calls. If Extension is set, this option will not take effect.
5.
Make outbound / inbound calls to / from PSTN network
5.1
Make sure FXO modules are installed
If there are FXO modules installed in your APBX, APBX configures analog trunk automatically when they are
detected. The module installed in IP01 can be:
AX110X
5.2
Make outbound calls
Go to
PBX Settings
->
Outbound Routes
, click
to add an outbound route.
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X
means Any Digits from 0-9
NOTE: Before using them, please make sure FXO port is connected with PSTN line (InService). The
connection status can be checked in
System Status
->
Trunk Status
