9
Fig PB-3
Fig PB-4
Close the back of the bracket onto the Pole
Fig PB-3
and insert the long
screw with the knob through the back of the bracket and into the captive nut
in the front half of the bracket. Tighten the knob until the bracket is fixed tightly
in place
Fig PB-4
.
With the Pole Bracket firmly attached to the Tripod, mount the Alfresco
Portable heater to the bracket using the 2 screws provided with the
Fig PB-5
heater as shown in
Fig PB-5
.
NOTE: The screws to attach the
heater come in the bag with the
chains supplied with the heater, not
the pole bracket.
Once the heater is mounted onto the
pole bracket, tighten the wing-nut
to point the heater into the desired
direction.
The Alfresco Portable heater comes
complete with pre wired cable with
an external waterproof connector.
The cable should be looped over the
top of the pole bracket and secured
WATER PROOF CABLE CONNECTOR ASSEMBLY
that they slip together. (1)
Once the two halves are together tighten the
cover until it is totally closed. (2)
The cover should reach all the way to the bottom
of the connector. (3)
2
1
To connect the 2 halves of the
supply cable together, line up
the 3 pins on both halves so
to the pole with the provided Velcro strap - underneath the pole bracket
keeping the cable away from the back of the heater.
