
6254M Mainboard
Chapter 1 Introduction
4
CHAPTER 1 INTRODUCTION
Welcome to utilize 6254M mainboard, the Intel 440BX chipset supporting
both 66MHz and 100MHz Front Side Bus Pentium
II/III CPU. It also has the
built-in Yamaha YMF 724/740 3D PCI sound chip and Voodoo3 VGA chip.
The Yamaha YMF 724/740 sound chip is using PCI interface which allows
your computer to perform 3D stereo sound. And the Voodoo3 3D VGA chip
working with AGP interface technique allows users to have 2D/3D display
resolution without plug any of VGA cards.
1-1 System Features
:
CPU Slot supporting Intel Pentium
III CPU 450Mhz to 550MHz, Pentium
II CPU
233MHz to 450MHz and Intel Celeron
CPU 266MHz to 466MHz.
:
Intel 440BX AGPset.
:
Yamaha YMF 724/740 3D PCI Sound Chip.
:
Onboard 3Dfx Voodoo3 with onboard 16MB SGRAM.
:
Four 168-pin DIMM Sockets in four banks of 64-bit wide path up to 512MB
SDRAM or 1GB registered SDRAM (with parity chip ECC support).
:
Built-in Switching Voltage Regulator.(VRM 8.2 SPEC.)
:
Auto-detect CPU core voltage range from 1.8V to 3.5V.
:
Two16-bit ISA slots and four PCI slots compliance with reversion 2.2 of the PCI
Local Bus specification.
:
Dual Master IDE connectors support Ultra DMA/33 (33MB/sec), up to four
devices in two channels for connecting high capacity hard disk, CD-ROM,
LS-120MB floppy drive, tape backup etc.
:
Winbond 83977 high-speed Ultra Multi-I/O chipset.
:
ATX Power Connector.
:
USB (Universal Serial Bus) Connector supporting up to 127 peripheral devices.
:
PS/2 Keyboard Connector and PS/2 Mouse Connector.
:
Infrared Transfer (IrDA TX/RX) Connector.
:
One FDD Port supporting two devices available for 1.2MB, 1.44MB and 2.88MB.
:
Two 16550A fast UARTs compatible Serial Ports.
:
One EPP/ECP mode Parallel Printer Port.
:
Software Power Off Control; Modem Ring On; SB-Link; Keyboard & PS/2 Power
On; Wake-On-LAN functions.
:
Built-in Hardware Health Monitor chip. (optional)
:
Intel LDCM software. (optional)
:
ATX Form Factor; Hardware Dimension is 305mm x 210mm. (12" x 8.26")