background image

4

Wall mounting using the bracket (provided)

Make sure that the wall where you plan to mount the appliance is solid, and 

free of electrical cables or water pipes inside. 
This heater is intended for permanent installation. Be sure that the heater is 

not facing the ceiling or inflammable substances.

Fasten the bracket to the wall using at least 4 points of attachment, passing through 

the “

A

” holes (fig. 1). 

Use the 

B

 holes just as reference (fig. 1).  

The heater can be angled on its bracket using the 

C

 screw. Individual modules can 

be angled using the 

screws (fig. 2 ). 

Once adjustment has been made, tighten all the screws.

Ceiling mounting with chains (not provided)

Fasten the chains (of the correct length) to the ceiling, and attach them to the heater 

using the “S” shaped hooks included with the packaging. Pass the S hook through 

the holes marked 

(fig. 3).

3.  TECHNICAL FEATURES

The Riviera infra red heater range is made up of appliances having one, two, or three, 

2000 Watt heating modules. 

4.  USE INSTRUCTIONS

The Riviera infra red heater was designed for zone heating on large premises. 

Production departments, churches and gymnasiums are ideal application 

sites. With high efficiency and heat from long distances, a compact size and 

light weight: a wide range on installations can be easily made. The comfort 

is immediate, no preheating is necessary and this can give a large cost 

saving on large air volume spaces or where occupancy is not continuous. 

Radiant heating gives a pleasant comfort and in absolute silence without any moving 

Model

RIVIERA 2000w 

RIV200

RIVIERA 4000w 

RIV400

RIVIERA 6000w 

RIV600

Power supply

220-240 V ~ 50-60 Hz

220-240 V ~ 50-60 Hz

220-240 V ~ 50-60 Hz 1P or 

380-415 V ~ 50-60 Hz 3P+N

Power

1 x 2000 W

2 x 2000 W

3 x 2000 W

Current

9 A

18 A

27 A or 3 x 9 A

Lamps (IR-A)

1

2

3

Coverage

9-12 m²

12-16 m²

16-20 m²

Weight

2.2 kg

3.0 kg

3.8 kg

Dims. (HxWxD)

235 x 496 x 313mm

375 x 496 x 313mm

515 x 496 x 313mm

Cable (min. 

cross section)

3 x 1.5 mm²

3 x 2.5 mm²

3 x 6 mm

or 5 x 1.5 mm²

CAUTION

Summary of Contents for RIVIERA RIV600









Reviews: