Registration and deregistration
10
Deregistering handsets
You may need to deregister your handsets if:
You have 12 registered handsets and need to replace a
handset.
-OR-
You wish to change the designated handset number of your
registered handsets.
You must first deregister ALL handsets, and then register each
handset you wish to use again, one at a time.
Please read carefully through all the instructions on this
page before beginning the deregistration process.
Deregister all handsets from the telephone base
for AT&T models TL92273/TL92373/TL92473
Make sure that all handsets are out of the telephone base and
chargers before you begin deregistration.
Press and hold
/HANDSET LOCATOR
on the telephone
base for about 10 seconds until the
IN USE
light flashes, then
release
/HANDSET LOCATOR
.
Quickly press
/HANDSET LOCATOR
again. You must press
/HANDSET LOCATOR
while the
IN USE
light is still flashing.
The
IN USE
light flashes for about seven seconds. If the light
stops flashing, start again with Step 1 above.
All system handsets show
To register, see user manual
and you hear a confirmation tone when the deregistration
completes. The deregistration process takes about 10 seconds
to complete.
After deregistering, register each handset again individually.
See
Adding and registering handsets
on page 8.
NOTES:
If the deregistration process fails, you may need to reset the system and
try again. To reset, unplug the power from the telephone base and plug it
back in.
You cannot deregister the handsets if any other system handset is in use.
Even if the battery is depleted, you can still deregister the handsets by
following the steps above.
•
•
1.
2.
3.
4.
5.
•
•
•
