10
Headset base and handset lifter installation
Installation options
There are three installation options as described below.
For Options 1 and 2, the handset lifter works with the cordless
headset to provide a complete communication solution for most
corded telephones. The lifter raises and lowers its switch hook
presser to answer, make and end phone calls. The ring detector
provides an incoming call indication through the cordless
headset, so you can answer calls even when you are away from
the telephone base.
Option 1:
Connect the headset to a corded phone (see pages
11-12). This option allows you to use the headset to
remotely control the lifter for answering or hanging up
a call.
Option 2:
Connect the headset to a corded phone and computer
(see pages 13-15). This option enables you to use the
headset for VoIP (Voice over IP) calls through your
computer, or traditional phone call through the
|corded phone.
Option 3:
If you do not want to install the lifter on the corded
handset, you can simply connect the headset to a
telephone wall jack through the line splitter provided
(see page 16). The headset acts as a supplementary
device that can join calls. Use the telephones
connected to the same telephone line to make or
answer calls.
