27
Getting started
Adding and registering a headset
The TL7612 supports up to two cordless headsets. The headset
provided with your TL7612 is already registered. You can add
a new headset (TL7600, purchased separately) to the headset
base at any time. You must register each new headset with the
headset base before use (see page 28).
-OR-
You can register a maximum of two headsets (TL7612/TL7600)
to an AT&T DECT 6.0 cordless telephone. The telephone base
recognizes and counts a headset the same as a handset.
When you register the headset to an AT&T DECT 6.0 cordless
telephone, the headset base acts only as a charger for the
headset. The
LIFTER AUDIO ADJUST
,
VOLUME
/
and
MODE
controls on the headset base become inactive. You can
place the headset base anywhere you have an available power
outlet. Do not plug in the telephone line cord; you only need
to plug the headset base into a power outlet (see page 29).
Refer to your telephone user's manual for the maximum
number of handsets that you can register to the telephone
base. If you have the maximum number of handsets registered,
you need to follow the deregistration information in your
user's manual.
Visit
www.telephones.att.com/headsets
for a list of
compatible cordless telephones.
You can only register the headset to one product at a time, so
the headset must be deregistered before registering to a headset
base or a cordless telephone (see page 30).
The first headset provided with your TL7612 has a blue
ON/OFF
light. When you register a second headset, the
ON/OFF
light of
the headset turns orange to help you identify the headsets.
•
•
