PLEASE WAIT...
HANDSET X
REGISTERED
8
PRESS HNDST LOC
4 SEC ON BASE
To register a handset to your telephone base
• When first purchased, all optional accessory
handsets show
NOT REGISTERED
on the
screen. The new handset may need to be
charged for five minutes before registering to
the telephone base.
• Make sure your handset battery is properly
installed and charged (pages 5-6).
• Place the unregistered handset into the
telephone base. After a few seconds
PRESS
HNDST LOC 4 SEC ON BASE
will be shown on
the screen.
• Press and hold
HANDSET LOCATOR
on the
main telephone base until the
IN USE
light
comes on (about four seconds), then release
the button.
• The handset will show
PLEASE WAIT...
for a
while.
• The handset will show
HS X REGISTERED
and will
beep if the registration was successful.
NOTE:
If the registration is not successful, the display
will show
NOT REGISTERED
. Reset the handset by
lifting the handset out of the telephone base and
then place the handset back in the telephone base.
Now try the registration process again.
Getting started
Adding and registering handsets
NOT REGISTERED
